TeamSwift

Fainya, (Richard) Purchased an Ecm From Me, He communicated wonderfully. Paid quickly, and was an all around joy to deal with. I can safely add him to the growing list of fellow Teamswifters that I would truly LOVE to meet. I would gladly do business again ***** (Five stars), Jonathan

_________________
Current stable:
1987 Sprint Turbo (Porsche Guards Red) 75k 5sp,AC, w/cruise, Resto-Mod,owned since 1997) (looking for dash-pad)
1989 GTI (white)104k 5sp,AC (Resto-mod completed 1999). (looks great, But rusted out ,need clean southern body.)Help!?
1991 Vert (red) 129k 5sp,AC, Resto-Mod, 75% Done.(Clean SW car)
1993 GT(Teal) 103k 5sp,AC,w/PW (Resto-Mod,60% done.)(Clean SW car)
1994 Swift GS 4Dr sedan (Painted 2005 Ford Kona Blue) 95k 1.3 SOHC 5sp

Another smooth transaction with Fainya. A pleasure to do Business with. Jonathan

_________________
Current stable:
1987 Sprint Turbo (Porsche Guards Red) 75k 5sp,AC, w/cruise, Resto-Mod,owned since 1997) (looking for dash-pad)
1989 GTI (white)104k 5sp,AC (Resto-mod completed 1999). (looks great, But rusted out ,need clean southern body.)Help!?
1991 Vert (red) 129k 5sp,AC, Resto-Mod, 75% Done.(Clean SW car)
1993 GT(Teal) 103k 5sp,AC,w/PW (Resto-Mod,60% done.)(Clean SW car)
1994 Swift GS 4Dr sedan (Painted 2005 Ford Kona Blue) 95k 1.3 SOHC 5sp

Fainya did a Turbo Sprint distributor so nicely, the original owner didn't recognize it.
Excellent man to deal with, will be asking him to go through a distributor for me down the line.
Thanks.

_________________
DIY Broken Bolt Removal: viewtopic.php?f=22&t=41042
DIY Clutch Adjustment: viewtopic.php?f=9&t=48281
DIY Wheel Bearings: viewtopic.php?f=2&t=29003
DIY Shocks: viewtopic.php?f=10&t=45483
DIY Wheel Align: viewtopic.php?f=2&t=42479
Once you get the cars dialed-in (compression, leaks, bearings, alignment, brakes) swap in new rubber and glass, you've got something which should last for years!

I posted positive feedback for fainya on my repair thread, but it should also be posted here.
Last winter, my car was dead in the snowbank for weeks, until I finally figured out the tangs on the distributor had broken off.
I sent it off to fainya.
Not only was the tang broken, but one distributor spring was broken and the other was almost broken.
Of course, the seal was leaking, too....and the inner shaft was worn in a spot.
Fainya was faced with tough repairs but did a super job.
Here it is....another winter later...and at temps of 20 below, it starts right up.
No more extended cranking periods on the starter.
I'm really pleased with fainya's work.

fainya recently rebuilt a tired twincam distributor for me. his fee is more than reasonable, it's a bargain, and his work is flawless.

he gave me a quick turn around as well as a professional job. i highly recommend him for this type of work as he has a machine shop and distributor testing bench, indispensible for getting distributors done correctly.

the distributor he sent back to me was as clean as a pin, bead blasted with worn screws and o-ring replaced, shaft polished, and the shaft seal replaced - returned to service limits and with the proper advance curve restored.

thanks richard, for the great job!

_________________
1991 Blue Geo Metro Convertible highly modified 1.0L Turbo3 5 spd. - 1991 Red Geo Metro Convertible customized with a Twincam 5 spd.

My Turbo3 Project
My Cardomain Page -Ol' Blue
My YouTube Channel
My Photo Gallery
SAAB Sonett II

It was great to meet Fainya at the recent California gathering.

All I wanted was to stop getting globs of oil spit out on the top of my transmission, but the rebuilt distributor he brought me is better-than-new.

Fainya's work is the bees knees

_________________

Spanish Inquisition Racing chip burning service--build yourself a custom chip!
http://www.teamswift.net/viewtopic.php?f=17&t=57216

umm i know that's not the right topic, but i have same problem.. what in distributor i need to change? (i'm in EU and i need my car going so sending distributor for rebuilding to usa is not an option..)

Just got my trans rebuilt by rich

Rich knows his stuff well, prices his services very reasonably, and does impeccable work

My trans now works better than it did when I first bought the car at 65k miles

It’s quiet, smooth as butter, and not so much as a hint of seepage

Now I need to find one of my spare distributors and get it in the mail to him so I can fix this pesky oil leak........

Thanks for everything rich, it’s so nice to have third gear and no crunching noises

_________________
93 metro 1.0/5spd/ac......parts manufacturing test vehicle
[email protected]