TeamSwift

mike cove sent me a set of very nice custom assembled 8mm plug wires to try out. he'll probably carry these soon.

i've seen these in the red and yellow and they really are very nicely made. the individual wires are numbered and have the correct boot at the spark plug end. the other end has a straight (180*) boot. the coil wire has one 90* end and one straight end.

the length is absolutely perfect on each of the 4 wires. the 8mm shell fits snugly into the OEM wire looms.

it's hard to find a set of wires this nice anywhere. i hope that he makes them available soon.

please check my personal album pics for the pics of this wire set.

http://www.teamswift.net/album_personal ... 23d88286bd

_________________
1991 Blue Geo Metro Convertible highly modified 1.0L Turbo3 5 spd. - 1991 Red Geo Metro Convertible customized with a Twincam 5 spd.

My Turbo3 Project
My Cardomain Page -Ol' Blue
My YouTube Channel
My Photo Gallery
SAAB Sonett II

Sign me up for a set Lookin' good

_________________

HiTemp Inc. ....... taking over the world one Sprint Turbo and Swift GTi at a time.

Chassis Flex Motorsports

i'm in for a set as well
they look great, but if it's possible, i'd rather have 90degree elbows on the distributor ends just to keep it a bit neater looking. i'm guessing the difference in distributor position between the mk1 & mk2+ g10 heads is almost insignificant.

_________________
'92 Swift GT, '94 Swift GT, '88 Turbo Sprint, '98 Swift ... all sold years ago

i am liking em. but i am with nitro on the dist ends.

_________________
91 m/t vert heavy body mods
92 a/t vert stock (wife's commuter)
NE North Carolina
Geozukigti Wrote:
"Born to be slow, good for show, now it can go!"
n1tr0 wrote:
of course it could also be part of the whole 'metro'sexual movement

I'm just waiting fort my sample to come in, check them out, and they will be available, for 1.3/1.6 SOHC, as well as both turbo, and non turbo3's.
I should be able to do any kind of custom ends for the coil, or dist.

_________________
Contact 3tech: [email protected]

hey will those also be made for the distributorless ignition on the 16v sohc engines?

_________________
1999 G13B Metro
lotta Mods
2002 Sentra SE-R
intake/header/exhaust/cams/pulley

I can get those too, but for some reason, they're not as cheap as you'd expect.
I should have prices up in a week, or so.

_________________
Contact 3tech: [email protected]

any word on the 16 valve sohc (DIS) wires

_________________
1999 G13B Metro
lotta Mods
2002 Sentra SE-R
intake/header/exhaust/cams/pulley

7mm $37
8mm $46
9mm $50
I'm not sure why they are so expensive, but I think it has to do with the plug-ends.
Shipping is $10.

_________________
Contact 3tech: [email protected]

sweet i will take some 9mm red plug wires, lol there is only two wires, one is barely a wire, should give me a stronger spark though, with the 9mm wires

_________________
1999 G13B Metro
lotta Mods
2002 Sentra SE-R
intake/header/exhaust/cams/pulley

Why aren't these listed on your site suprf1y? Somebody mentioned in a thread they had just recieved a set from you. You have PM.

_________________

HiTemp Inc. ....... taking over the world one Sprint Turbo and Swift GTi at a time.

Chassis Flex Motorsports

thats what I wrote to Mike after I recieved the plugs. I highly recommend that any of you looking for plugs buy them from him, the quality on these surpasses the NGK wires I was looking at by FAR.

For a few reasons.
a)I've been really busy, and just haven't had time to put something together for Kris to put up for me. I could use two of me right now.
b) I had to get some in my own hands first before I could make them available. Since this is something I don't build myself, I needed to verify the quality first. Richard (t3rag) is my 'shipping agent' in the States, and he had a set before I did.
Casey saw my ebay auction, and got his through there.
If anybody is interested, feel free to contact me. These wires really are nice.

_________________
Contact 3tech: [email protected]

These are the colours available for the wires.

_________________
Contact 3tech: [email protected]

Are these available for the DOHC?
Also wot size is the max u can go for the gti?
Would Honda 10.2mm be too big or not compatible at all?

My supplier is no longer manufacturing 9mm wires, so the only options will now be 7mm, 8mm, and a new high heat (1200 degree) fiberglass braided set that is 10.5mm dia., and available in most of the same colours.
Pricing for them is coming.

_________________
Contact 3tech: [email protected]

can you get the resistance values for the 10.5mm ?

_________________
'92 Swift GT, '94 Swift GT, '88 Turbo Sprint, '98 Swift ... all sold years ago

Exactly the same as the 8mm wires.

_________________
Contact 3tech: [email protected]

would you mail them to the UK?

Sure, why not?
It will just take some time.
PM me if you are interested.
you can see them on ebay right now, just don't buy them there.

_________________
Contact 3tech: [email protected]

Where can i find the ohms/ft? Someone asked their(9mm) resistance, but the answer was "same as 8mm", so whats the reisistance of 8mm? also at "http://www.teamswift.net/3tech/" the wires are for " 89-up 3cyl ", is there anything for sale to everyone who has a 1.3 yet?

thanks

Hi Mike:

I try to keep to upgrade my geo, I get from You the camshaft and the time sprocket, next is the sparkwires, but I have a question, can You sayme if the BLASTER 2 COIL from MSD IGNITION (part No. 8202) is the best option for a metro 93 with a small and a square coil.

let me know how I send you the money, I have a paypal account if work for You.

thanks for your support

_________________
nothing sweetest than fits everywhere at 65 mph!

email me at [email protected]

_________________
Contact 3tech: [email protected]