TeamSwift

All the results from the test cars have been positive. Because of the amount of PM's, and emails I've been getting, I will now make these available.
The sprockets are intended for the 3cyl. motor with the square tooth timing belt, which I believe to be pre 94. The 94-95 sprockets are also now available, and ocassionally the 96-up sprockets can be had.

They will also work on the 1.3 8V motors, prior to 95, but because of the factory valve timing, I don't recomend any more than +6, and thats only with a fairly healthy cam. If there is interest, I will make +4 sprockets for the 1.3 8V.

This is what is available.
+6, +8, +10 cam sprockets. These are modified stock sprockets.
Dyno testing by B'villetom showed a 5 hp improvement with just a +10 sprocket on a stock motor with open exhaust.

Prices are US$31.50/shipped to US or Canada for the 89-93 sprockets. Shipping is more for the other.

DOHC cam gears? how much?

_________________

Wait until I get results from n1tro. If the results are positive, then prices will be the same.

_________________
Contact 3tech: [email protected]

we're going out to do a bunch of timed runs on some of the different settings this sunday ...

_________________
'92 Swift GT, '94 Swift GT, '88 Turbo Sprint, '98 Swift ... all sold years ago

Where?

old post sadly, it looks like i'm going to have to wait until i'm over on the mainland next unless someone around here (victoria) has an impact gun ..

_________________
'92 Swift GT, '94 Swift GT, '88 Turbo Sprint, '98 Swift ... all sold years ago

To get the stock sprockets off? I knew you hadn't replaced them yet. I have access to an old timing belt if you want to slip that one on and jam a screwdriver in the flywheel ring gear.

ANY RESULTS ??

_________________
constantly evolving,daily driven racecar

Is there no core charge? maybe a discount if we send you back our stock sprocket once youres is installed? Eventually you got to run out of sprockets lol.

_________________
90 Sprint supercharger in a box waiting for warm weather.
85 Fiero GT solo racer custom interior.
81 Audi 4000

There is no core, but I'll charge you one if that will make you happy
The problem is that the core charge would be about what it costs to ship.

_________________
Contact 3tech: [email protected]

Thanks for clearing that up.

_________________
90 Sprint supercharger in a box waiting for warm weather.
85 Fiero GT solo racer custom interior.
81 Audi 4000

Any sprockets for 87-88 T3 engine ???? I would be interested . Its going to machine shop tomorrow , done in few days need to put it back together . Might as well have a cam gear on it if its available .

Its not really neccesary on the Mk1 cars unless you are running lots of cam. In that case, I would go max +6

_________________
Contact 3tech: [email protected]

Check PM

Got any for a 96 3cyl.

I do now.
PM me if you are interested.

_________________
Contact 3tech: [email protected]

how bout a 97 sohc 4 banger?

If you dont have one of these, get one for your Swift

_________________
'94 Suzuki Swift g10 3tech stuff:Port&Polish,225/355 cam,11:1 CR, SS valves,+10 Cam gear,underdrive; K&N intake; LTLSU's Custom racing springs with Monroe struts (2" lower front, 0.5" lower back); 185/55/R14 Kumho Ecsta SPT tires on Eagle 040 rims; Stripped out interior and removed AC system

Let me do some degreeing, and see if you really need one first. Good timing, I have one of those heads on my test bench right now.

_________________
Contact 3tech: [email protected]

have you found out how the DOHC advance sprokets work and what would you recomend for a stock DOHC engine, 6 8 or 10% advance?

http://www.teamswift.net/viewtopic.php?t=15919

mine responded very well to them

_________________
GO FAST TURN LEFT!! IF YOU HAVE TO TURN RIGHT, YOU NEED A ROUND OF WEDGE!!!

here is my sig. karma if you look

Perhaps this is a silly question, but couldn't you get 9° (360°/40 teeth) of advance with stock cam pulley by advancing it 1 tooth?

that's actually works out to be 18 degrees, you need to measure by the crank, not the pulley ... (or vice versa)
been there, tried that ..

_________________
'92 Swift GT, '94 Swift GT, '88 Turbo Sprint, '98 Swift ... all sold years ago

Hi, I would like to purchase an advanced timing gear for a stock '97 Metro 1.0 3 cyl. Do you have one available? and what degree would you recommend for this 5speed car?
Thanks,
Jerry Headley
Union, Wa. USA

I have one.
$25 + $8.50 shipping in US/Canada(those ones are heavy)
I recomend the +10 for your car.

_________________
Contact 3tech: [email protected]