TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Thu Nov 23, 2017 5:03 pm

Underbody braces, turbos and more!

View unanswered posts | View active topics


Board index » General Performance » MK1/2/3 1.3 GT/GT-i DOHC

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
erickramos
PostPosted: Mon Sep 12, 2016 8:10 am 
Offline

Joined: Mon Sep 05, 2016 9:47 am
Posts: 26
Location: Brazil
i see the king racing and acl race bearing, but i don't know who is better.
Top
 Profile  
 
erickramos
PostPosted: Mon Sep 12, 2016 11:08 am 
Offline

Joined: Mon Sep 05, 2016 9:47 am
Posts: 26
Location: Brazil
Acl race main 5M8337H and rod 4B8336H.
but i need 0,25mm
Top
 Profile  
 
Mile High Racing
PostPosted: Mon Sep 12, 2016 6:10 pm 
Offline
User avatar

Joined: Mon Apr 18, 2011 12:44 pm
Posts: 221
Location: Portage La Prairie, Manitoba,Canada
As long as you stay with the racing series they are both very good! My opinion Acl is slightly better.

_________________
1999 suzuki swift ice race car... Dohc engine conversion, 3tech 222/365 cams, bored tb, aasco lightweight flywheel, 4.56 final drive, Welded Diff, cultus intake, srd 4to1 header, spool forged rods, Megasquirt PNP, H&R sport springs and Koni yellow shocks.
Top
 Profile  
 
erickramos
PostPosted: Tue Sep 13, 2016 11:06 am 
Offline

Joined: Mon Sep 05, 2016 9:47 am
Posts: 26
Location: Brazil
and SEALED POWER Bearing? it's good to?
Top
 Profile  
 
Mile High Racing
PostPosted: Wed Sep 14, 2016 9:18 pm 
Offline
User avatar

Joined: Mon Apr 18, 2011 12:44 pm
Posts: 221
Location: Portage La Prairie, Manitoba,Canada
They are decent but not near as good as the Acl or King race series bearings. If car is just a street car then the sealed power will be fine but if it's being raced or some track days then I would stick with a race bearing.

_________________
1999 suzuki swift ice race car... Dohc engine conversion, 3tech 222/365 cams, bored tb, aasco lightweight flywheel, 4.56 final drive, Welded Diff, cultus intake, srd 4to1 header, spool forged rods, Megasquirt PNP, H&R sport springs and Koni yellow shocks.
Top
 Profile  
 
erickramos
PostPosted: Tue Oct 04, 2016 8:55 am 
Offline

Joined: Mon Sep 05, 2016 9:47 am
Posts: 26
Location: Brazil
ok, tank's.

my cranckshaft need to go for 0,25 mm. this is bad?
Top
 Profile  
 
PBC137
PostPosted: Thu Feb 02, 2017 12:22 am 
Offline

Joined: Sat Nov 15, 2008 7:47 pm
Posts: 1292
Location: Trinidad, W.I.
ACL, King or Mahle...nothing else.

_________________
~the other Ralph~
Certified Suzuki Owner:
MKIII Swift GTi - The Green Destiny!
2010 Suzuki Jimny - The DD Workhorse!
Top
 Profile  
 
jeremy_nash
PostPosted: Thu Mar 02, 2017 9:30 pm 
Offline

Joined: Thu Sep 22, 2011 8:57 pm
Posts: 78
Location: Bristol, Tn
I used stock sized king bearings on my 89 g13b rebuild have had no problems,
Top
 Profile  
 
db
PostPosted: Sun Mar 05, 2017 10:48 am 
Offline
User avatar

Joined: Sun Oct 24, 2004 3:31 pm
Posts: 466
Location: Wahoo, Nebraska
I have a set of ACL racing mains and Con rod bearings on the way. I'm using std size since my crank was within tolerances. I'll be plasti-gauging before installation to make sure clearances are right.

_________________
93' Suzuki Swift Gt Turbo
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » General Performance » MK1/2/3 1.3 GT/GT-i DOHC

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group