TeamSwift

Calipers bolt right on. We had a set of (barely) used Gti disks machined to fit, since the stock ones were a bit rusty.

_________________
'95 Swift 1.0:

- 0,5mm oversized pistons
- mildly ported head, 1,7mm taken off
- ss exhaust valves
- 222/365 3tech cam
- +10 gear
- K&N air filter
- TBI bridge removed
- 40mm throttle and intake manifold
- srd underdrive pulley
- AASCO 3kg flywheel with GTi clutch
- GTi catback
- deleted cat, now 2" ss pipe
- 14x6J ET45 BSA Racing
- Nankang AS-1 165/55-14
- 35mm lower Apex front and rear springs
- GTi sway bar
- Turbinetech underbody brace
- Ultra Racing upper strut bar

0-100kph: unknown seconds

Driving in snow or slush with my Subaki swifty GT is frickin' awesome. Incredible grip on snow and icy roads. Full acceleration even uphill. And my new Nokian wintertyres are fantastic, grip like hell. Finnish folks sure know how to make the best snowtyres.

xx Roxy

PS: Can't wait for summer. 1600 turbo time

_________________


Cultus GTi AWD AF34S
'97 Justy tranny + AWD setup
'93 GT engine, wire looms, interior, brakes.
3 tech cams
K&N cold air intake
SuzukiRD racing header
Custom 50 mm steel exhaust system
QSP racing steering wheel

Future Plans
Garrett GT1549
Intercooler
HKS BOV
MS2 ECU

I envy you

Have fun with it!
And how about some more pics of it?

Hello i am form bulgaria witch is in europe(cuz many people dont know it even existed)..so i have a suzuki swift GTI with 1.3 16v twin cam 1993 ...and a subaru justy 4x4 80hp 2002(which was gifted to me)...so the suzuki got crushed by a bus and now i am thinking if i can but the restored G13b engine in the subaru ???...as a found a few
topic here and there not aa straight answer was given ...some say it can be done and it's eaasy other dat is it hard ..another dat it isnt possible...a would like a straight answer if possible ...cuz i really dont want to start it with come to the reallisation midway dat is not possible ..ty for your help

P.s my space doesnt work well ....and my english is not great either !!

Yes you can. The twin cam engine drops right in, gearbox is a bolt on. Most of the work is in the wiring.

_________________
'95 Swift 1.0:

- 0,5mm oversized pistons
- mildly ported head, 1,7mm taken off
- ss exhaust valves
- 222/365 3tech cam
- +10 gear
- K&N air filter
- TBI bridge removed
- 40mm throttle and intake manifold
- srd underdrive pulley
- AASCO 3kg flywheel with GTi clutch
- GTi catback
- deleted cat, now 2" ss pipe
- 14x6J ET45 BSA Racing
- Nankang AS-1 165/55-14
- 35mm lower Apex front and rear springs
- GTi sway bar
- Turbinetech underbody brace
- Ultra Racing upper strut bar

0-100kph: unknown seconds

thack you for the straight answer can you tell me abouth the wireing ii was thinking if using the justy's cuz mine when to hell and back a few times ..wont it work ? ....cuz the justy has heating seats and mine doesnt ?

Sorry for the wait.

1997-2003 Swifts and Justys have completely different wiring colors and plugs than before and you have to puzzle and solder everything together, which is a lot of work. The easiest way is to use the wiring from the GTi, that's what we did. We transplanted everything, including the interior and the only wires we had to splice were from the fuel pump (A Justy has an extra pump) and the taillights. As far as I know, the GTi wiring loom has the plugs for the heaters. There should be an opening in the carpet somewhere under the seats, you should find them there.

_________________
'95 Swift 1.0:

- 0,5mm oversized pistons
- mildly ported head, 1,7mm taken off
- ss exhaust valves
- 222/365 3tech cam
- +10 gear
- K&N air filter
- TBI bridge removed
- 40mm throttle and intake manifold
- srd underdrive pulley
- AASCO 3kg flywheel with GTi clutch
- GTi catback
- deleted cat, now 2" ss pipe
- 14x6J ET45 BSA Racing
- Nankang AS-1 165/55-14
- 35mm lower Apex front and rear springs
- GTi sway bar
- Turbinetech underbody brace
- Ultra Racing upper strut bar

0-100kph: unknown seconds

Hey gozer goede project man
Ik zelf heb ook een justy awd 98 en wil een gti motorblok kopen en hem in laten bouwen maar kan jij hem of ken je iemand die dat kan laten inbouwen?

To europeeans with the justys :

We're a bunch of guys in Québec wishing to buy used Subaru justys in europe and have them imported in Canada. We're looking at maybe 4 cars to put in a single container. One of us would fly there to make arrangements, but the thing is we have a hard time contacting people that sell the cars. They won't reply to our messages... Any help would be appreciated.

http://www.clubsuzukiquebec.com/forum/v ... 55&t=11348

_________________
Suzuki Gold Master Tech
'07 Suzuki SX4 JLX AWD 2.0 | Turbine Tech turbo kit @ 7psi
'08 Suzuki SX4 Sport 2.0 , average baby carrier

Hi,

When are you going to do this?
Are you hoping to buy not so good cars and transfer all of drive train into your Swift body? Or the other way around?

In UK we uses salt in winter so we do get rusty easily, too.

Let me know if I can be of any help.

Cheers
Atchi

We are looking near germany or France, mainly because we have no clue what country they were available, and because they have to be LHD. We have an anti-RHD law because of excessive skyline GTR imports from dumb kids

_________________
Suzuki Gold Master Tech
'07 Suzuki SX4 JLX AWD 2.0 | Turbine Tech turbo kit @ 7psi
'08 Suzuki SX4 Sport 2.0 , average baby carrier

just started a thread to stop the hijack
viewtopic.php?f=43&t=62035

_________________
swift 2000
megasquirt efi
rx7 460cc injectors
td05h-16g @ 18 psi
SRP forged civic piston
suprf1y's 200-335i 210-240e camshaft
1.6 gearbox with swift sport 2007 gear ratios
cusco 1way LSD

This is no hijack! What do you think is gonna happen to these 4 poor Justys hahahaha. Well maybe not for manueta
We'll probably get better visibility tho.

_________________
Suzuki Gold Master Tech
'07 Suzuki SX4 JLX AWD 2.0 | Turbine Tech turbo kit @ 7psi
'08 Suzuki SX4 Sport 2.0 , average baby carrier

That's the case, may be ask Giannis in Greece.

Here is his car.

http://www.redlinegti.net/forum/viewtop ... 0cc14d3d63

Cheers
Atchi