TeamSwift

I just recieved a set of pistons in great shape, just need a good cleaning and a new set of rings and bearings. Well I set out today to get this done so I can get these installed soon

Tools Used:
Wire Brush
Tooth Brush
Simple Green
Patience

1st I soaked the pistons in Simple Green to start the break up of the baked on carbon

Before Pic



After they have soaked for 30min to an hour I pulled them one by one and cleaned them up with the wire brush and got the nooks and crannies with the tooth brush.

Took me about 10-15 per piston, I think it turned out great

Here are the After Pics

_________________
1993 Suzuki Swift 1.3L GA
http://www.pctek4you.webs.com

Good job Raygo! They look like new again.

_________________

• EcoMudder - Geo Metro Mudder
• Project page
• Build Video
• 1991 4 Door Truck Conversion
• Modified Suzuki 1.0L Engine
• High Stall 3200 RPM Converter
• Auto Trans with Welded Differential
• Custom Exhaust and Intake System
• 6" Suspension Lift & Weight Reduction
• 27" Kenda Executioner 6 Ply ATV tires