TeamSwift

I got a aluminum honda radiator and the bottom hose was on the pass. side and it needed to be on drivers side. Have you checked that on the radiators you have??? (this was a ebay one) Thanks Stephen

can you get vitara pistons? g16b 75mm ones? I would want 1mm oversize vitara if you can. pm me

_________________
1991 Swift GT Build G10 +25 psi + other goodies
1996 Metro Build QR25de swap, still undecided where to take it
the lolcar family

no, i cant but i know someone who can. http://fjdistributors.com/index.php?cPath=38_43

he is a good guy. we both are sponsors on a couple of the same forums. he markets those pistons to the honda guys, but they are the same pistons

_________________
http://www.EvansPerformance.net

The I'm new here sale!!! http://teamswift.net/viewtopic.php?p=257971#257971

ycp is good to hold 200whp? as in 66hp/cyl not just 50. I dont want any weak spots on this 3banger

_________________
1991 Swift GT Build G10 +25 psi + other goodies
1996 Metro Build QR25de swap, still undecided where to take it
the lolcar family

the record with those pistons in a civic is 471whp at 29psi. 200whp should be easy

here is a link to it
http://www.homemadeturbo.com/forum/inde ... ic=94110.0

_________________
http://www.EvansPerformance.net

The I'm new here sale!!! http://teamswift.net/viewtopic.php?p=257971#257971

thanks for the link, I assume his pricing is for 4 pistons... I dont need 4, is he the kind of guy you can call and work it out?

_________________
1991 Swift GT Build G10 +25 psi + other goodies
1996 Metro Build QR25de swap, still undecided where to take it
the lolcar family

i dont know if he will sell 3 or not. pricing is for a set of four. like i said, he is marketing the civic guys. its worth a shot though. if he has anyone asking for 1 piston, then im sure he would sell them one and you three

_________________
http://www.EvansPerformance.net

The I'm new here sale!!! http://teamswift.net/viewtopic.php?p=257971#257971

or put it on the shelf for the next guy who orders 3, but thanks, ill give him a shout. I just dont have anything I can bore out to 76mm and use a vitara piston. maybe I can check the lawnmower lol

_________________
1991 Swift GT Build G10 +25 psi + other goodies
1996 Metro Build QR25de swap, still undecided where to take it
the lolcar family

are there a lot of people on this site using them? if so, maybe i will buy 3 sets which would be 12 pistons and i can split them into 4 sets of 3 and sell them here. im sure he would give me a wholesale price if i bought 3 sets

_________________
http://www.EvansPerformance.net

The I'm new here sale!!! http://teamswift.net/viewtopic.php?p=257971#257971

talk to him, from everything else I just read about these pistons being used in other d16 builds, I dont see why anyone building their t3 would even consider anything else

_________________
1991 Swift GT Build G10 +25 psi + other goodies
1996 Metro Build QR25de swap, still undecided where to take it
the lolcar family

76mm is kinda overkill. if you want to stock them, you'd be better with standard 75mm. that's already 1 mm over for a G10 or a G13. I know i'll replace the whole cylinder block before going 76mm...

_________________
Suzuki Gold Master Tech
'07 Suzuki SX4 JLX AWD 2.0 | Turbine Tech turbo kit @ 7psi
'08 Suzuki SX4 Sport 2.0 , average baby carrier

im getting another block, but im not going to resleeve it or anything. 76mm is the highest "safest" you can go. it just wont det and there wont be any problems

_________________
1991 Swift GT Build G10 +25 psi + other goodies
1996 Metro Build QR25de swap, still undecided where to take it
the lolcar family