TeamSwift

Hello all,
I have been talking to Wiseco so get some 74.5mm or 75mm 12:1 pistons made up.
They are a custom order. One set with rings etc cost $725CAD tax included.
If I get another person on board to make another set the cost goes down 10% to $650CAD
And more people would drive the price down

So would anyone be interested in doing a little group buy?

Thanks

Levon

_________________
___________________
89 Swift gti
Modified B16 P29 75mm pistons,13:1CR, cultus intake, genie header, genie exhaust, 3tech head, 3tech 222/365 cams, 3tech UD pulley, megasquirt 2.0, 60mm throttle body, Aluminum flywheel

If you're on GMF then it would be worth talking to GeoGlenn, he was asking about 75mm slugs for a gt engine he's building.

Unless you really need Wiseco you can get 12.5:1 from Suzukird. for about $650.

Levon, I would be interested in a set if we can get more guys on board to get the price lower! Been looking at buying a set from www.importperformanceparts.net already but they only offer up to 11:1 comp ratio!

_________________
1999 suzuki swift ice race car... Dohc engine conversion, 3tech 222/365 cams, bored tb, aasco lightweight flywheel, 4.56 final drive, Welded Diff, cultus intake, srd 4to1 header, spool forged rods, Megasquirt PNP, H&R sport springs and Koni yellow shocks.

Bump
I may have a friend order these through his business, which is extra discount.
If I get a couple more guys we could have forged quality pistons in the 500's
Something to think about for building your engine in the off season

Thanks
Levon

_________________
___________________
89 Swift gti
Modified B16 P29 75mm pistons,13:1CR, cultus intake, genie header, genie exhaust, 3tech head, 3tech 222/365 cams, 3tech UD pulley, megasquirt 2.0, 60mm throttle body, Aluminum flywheel

I would be interested in a lower compression ratio set.

_________________
Fainya
97 Geo Metro LSI,1.3L-GT-DOHC-16v,4.10 5-speed,A/C,170,000,suspension lowered 1",4 wheel disk brakes,15"alloy wheels with 185/50-15 Toyo's,GT bucket seats,analog oil pressure gauge,cruise control, new paint job. 40 mpg at 65 mph.
Good, fast, cheap. You only get two.

For what?

_________________
Contact 3tech: [email protected]

Sorry this idea didn't pan out, but mike(3tech/suprf1y) and I are developing our own oversized pistons, if that would interest you, there's a thread on here.

_________________
___________________
89 Swift gti
Modified B16 P29 75mm pistons,13:1CR, cultus intake, genie header, genie exhaust, 3tech head, 3tech 222/365 cams, 3tech UD pulley, megasquirt 2.0, 60mm throttle body, Aluminum flywheel